Handle ladles with two lips
An application: for casting of melted metal to sand, metallic moulds and shell moulds for cire perdue.
It is made as a weldment from wall and bottom, metal sheet has 2, 3, 4, 5 mm.
We produce from common material and also from refractory material for a temperature of 1000 ° C. For a temperature of 1400 ° C, the pans are pressed from one piece of material.
Basing on the Client’s requirement might be pot supplied also with the various sizes..)
| Marking | Upper callibre D1 (mm) | Under callibre D2 (mm) | Height H (mm) | Sheet metal wall/ bottom (mm) | The volume of Al alloy melt (kg) | The volume of Cu alloy melt (kg) | The volume of Zn alloy melt (kg) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| HP1-3/3 | 140 | 112 | 160 | 3/3 | 5,6 | 15,8 | 13,6 | 1,50 |
| HP2-3/3 | 170 | 140 | 190 | 3/3 | 9,8 | 27,6 | 23,8 | 2,30 |
| HP3-3/3 | 190 | 163 | 210 | 3/3 | 14,2 | 40,3 | 34,7 | 3,00 |
| HP4-3/3 | 215 | 180 | 220 | 3/3 | 18,7 | 52,9 | 44,9 | 3,80 |
| HP5-3/3 | 225 | 184 | 255 | 3/3 | 22,9 | 64,8 | 55,7 | 4,80 |
| HP1-3/4 | 140 | 112 | 160 | 3/4 | 5,6 | 15,8 | 13,6 | 1,55 |
| HP2-3/4 | 170 | 140 | 190 | 3/4 | 9,8 | 27,6 | 23,8 | 2,35 |
| HP3-3/4 | 190 | 163 | 210 | 3/4 | 14,2 | 40,3 | 34,7 | 3,10 |
| HP4-3/4 | 215 | 180 | 220 | 3/4 | 18,7 | 52,9 | 44,9 | 3,90 |
| HP5-3/4 | 225 | 184 | 255 | 3/4 | 22,9 | 64,8 | 55,7 | 4,90 |
| HP1-3/5 | 140 | 12 | 160 | 3/5 | 5,6 | 15,8 | 13,6 | 1,60 |
| HP2-3/5 | 170 | 140 | 190 | 3/5 | 9,8 | 27,6 | 23,8 | 2,40 |
| HP3-3/5 | 190 | 163 | 210 | 3/5 | 14,2 | 40,3 | 34,7 | 3,20 |
| HP4-3/5 | 215 | 180 | 220 | 3/5 | 18,7 | 52,9 | 44,9 | 4,00 |
| HP5-3/5 | 225 | 184 | 255 | 3/5 | 22,9 | 64,8 | 55,7 | 5,00 |
| Marking | Upper callibre D1 (mm) | Under callibre D2 (mm) | Height H (mm) | Sheet metal wall/ bottom (mm) | The volume of Al alloy melt (kg) | The volume of Cu alloy melt (kg) | The volume of Zn alloy melt (kg) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| HP1-4828-2/2 | 140 | 112 | 160 | 2/2 | 5,6 | 15,8 | 13,6 | 1,00 |
| HP2-4828-2/2 | 170 | 140 | 190 | 2/2 | 9,8 | 27,6 | 23,8 | 1,25 |
| HP3-4828-2/2 | 190 | 163 | 210 | 2/2 | 14,2 | 40,3 | 34,7 | 1,90 |
| HP1-4828-2/3 | 140 | 112 | 160 | 2/3 | 5,6 | 15,8 | 13,6 | 1,10 |
| HP2-4828-2/3 | 170 | 140 | 190 | 2/3 | 9,8 | 27,6 | 23,8 | 1,40 |
| HP3-4828-2/3 | 190 | 163 | 210 | 2/3 | 14,2 | 40,3 | 34,7 | 2,00 |
| HP1-4828-3/3 | 140 | 112 | 160 | 3/3 | 5,6 | 15,8 | 13,6 | 1,50 |
| HP2-4828-3/3 | 170 | 140 | 190 | 3/3 | 9,8 | 27,6 | 23,8 | 2,50 |
| HP3-4828-3/3 | 190 | 163 | 210 | 3/3 | 14,2 | 40,3 | 34,7 | 3,00 |
| HP4-4828-3/3 | 215 | 180 | 220 | 3/3 | 18,7 | 52,9 | 44,9 | 3,80 |
| HP5-4828-3/3 | 225 | 184 | 255 | 3/3 | 22,9 | 64,8 | 55,7 | 4,80 |
| HP1-4828-3/5 | 140 | 112 | 160 | 3/5 | 5,6 | 15,8 | 13,6 | 1,60 |
| HP2-4828-3/5 | 170 | 140 | 190 | 3/5 | 9,8 | 27,6 | 23,8 | 2,60 |
| HP3-4828-3/5 | 190 | 163 | 210 | 3/5 | 14,2 | 40,3 | 34,7 | 3,20 |
| HP4-4828-3/5 | 215 | 180 | 220 | 3/5 | 18,7 | 52,9 | 44,9 | 4,00 |
| HP5-4828-3/5 | 225 | 184 | 255 | 3/5 | 22,9 | 64,8 | 55,7 | 5,00 |
| HP1-4841-3/5 | 140 | 112 | 160 | 3/5 | 5,6 | 15,8 | 13,6 | 1,50 |
| HP2-4841-3/5 | 170 | 140 | 190 | 3/5 | 9,8 | 27,6 | 23,8 | 2,30 |
| HP3-4841-3/5 | 190 | 163 | 210 | 3/5 | 14,2 | 40,3 | 34,7 | 3,20 |
| HP4-4841-3/5 | 215 | 180 | 220 | 3/5 | 18,7 | 52,9 | 44,9 | 4,00 |
| HP5-4841-3/5 | 225 | 184 | 255 | 3/5 | 22,9 | 64,8 | 55,7 | 5,00 |
| Marking | Upper callibre D1 (mm) | Under callibre D2 (mm) | Height H (mm) | Sheet metal wall/ bottom (mm) | The volume of Al alloy melt (kg) | The volume of Cu alloy melt (kg) | The volume of Zn alloy melt (kg) |
|---|---|---|---|---|---|---|---|
| HP1-4742-6/6 | 6/6 | ||||||
| HP2-4742-6/6 | 6/6 | ||||||
| HP3-4742-6/6 | 6/6 |